How to Clean a Water Dispenser: 3 Ways to Clean Your Bottled Water Cooler

If you own an water dispenser or cooler it is important to keep it clean regularly. It is recommended that you clean it regularly. U.S. Department of Energy recommends cleaning your cooler at every bottle change or at least each six-week period, depending on when it is first. 

Clean water is the most crucial aspect of keeping your cooler in good condition. The good news is that washing your dispenser only requires that amount of time, some water as well as distilled white vinegar or bleach.

Feel free to check the best water dispenser here.

Before You Clean Out Your Water Dispenser

The first step is to decide on the cleaning product you prefer to choose to. You could choose to clean your water cooler using bleach or white vinegar. Both are completely secure and effective methods to kill germs and clear the machine of mildew or mold. However, your decision will depend on the kind of scent you prefer or what you have available. We do not recommend mild soaps as well as other chemicals since they can alter the flavor of the water you purchase.

Of course, water can also have vinegar taste as well. That’s why you need to make sure there is no remaining cleaning solution in the bottled water dispenser.

Cleaning with Unscented Bleach

To create an mild bleach solution to disinfect your water cooler Mix 1 gallon tap water and 1 tablespoon of chlorine that is unscented bleach. Stir it well. Be sure that you don’t spill bleach on your clothing and ensure that you wear gloves made of rubber that are clean.

Cleaning with a Vinegar Solution

If you would prefer to make use of vinegar to wash your cooler water, you can use simple, white vinegar. You can add 1 gallon of vinegar in an empty bucket. Fill it up with 3 4 quarts in warm water. Stir well.

Pour one gallon of water in an empty bucket. This step is similar regardless of whether you’re using bleach solution or vinegar. You should consider a bucket that has an handle or that’s easy to handle. It’s ideal if none of bleach solutions spill from the container onto the floor or on your clothes.

Create your bleach mixture. Add 1 tablespoon of bleach to each gallon of water you decide to make use of. If you can, choose unscented bleach since it’s more easy to eliminate the smell toward at the end.Mix the solution lightly. Utilize disposable gloves if you have them (a recommended precaution, however not required). Make sure you use them in a place that you are able to afford spilling some liquid, such as an enormous bathroom.

Create this vinegar mixture. For the mixture you’ll require only undiluted vinegar and the bucket. To reduce the smell of vinegar, decide to add one or two tablespoons in lemon juice. Mix the white vinegar one portion to every three parts of water. For example, if you’re using one gallon of water you should use 1/3 of the gallon (5 1/3 cups) of white vinegar. If you are adding lemon juice mix it in following the mixing of water with the vinegar.

As an important note the vinegar you use is around 80-90 percent efficient as using chlorine bleach to clean any item. Although water in bottles contains only a tiny level of bacteria it’s also possible that this amount will grow in time if it isn’t cleaned completely.

How to Clean a Water Dispenser: 7 Steps You Need to Take

Remove the power supply from your wall and then remove the bottle. Make sure there’s no other electronic device that are connected to the same outlet or within the space you’ve decided to wash your cooler. This eliminates the chance no matter how small that water may come into contact with electricity.

Use a sponge to wash the surface that is the cooler’s water by using the solution for cleaning. Let it stand for 2 to 5 minutes (but not more than that to avoid the wear and tear) Then take the solution out of the faucet (the cooler temperature one in the event that you have two taps) and into an additional container. It is then drained into the sink or into the toilet.

Rinse off the remaining cleanser. Fill the inner reservoir with water 4 times and pour it through the (cooler temperature) tap into an empty bucket. Make sure you are thorough to ensure that there is no vinegar or bleach taste remains.

Remove the drip tray then clean thoroughly. Wash both the tray as well as the screen (if it is present) and rinse them in pure tap water before return them back to dispenser. Make sure you dry them thoroughly to ensure that there is no water in any of the tight spaces.

Clean your hands thoroughly and dry the newly cleaned bottle using an absorbent towel. Be sure to wash your hands before handling the bottle once more.

The cap should be removed and then place the new container. Ensure a snug fit and look for bubbles of air rising up towards on top. This is a sign that the bottle has created an enveloping seal to the dispenser.

Make sure it is working. Fill a glass of water. Try the faucets in your dispenser if it includes them. Test the water by tasting it to make sure there isn’t any unpleasant smell that remains.

Understanding Your Water Cooler

Although some water coolers are directly connected to the plumbing of the office or home but the majority are bottled water dispensers that utilize the 5 gallon bottle of water. They can be top-loading, where the bottle is turned upside-down over the one side of the unit or bottom-loading in which the bottle is placed upside down in the cabinet that houses the base that houses the water dispenser.

Top-loading water dispensers allow gravity to perform most of the job. A valve forms an impervious seal between the machine and the bottle; as the water spigot gets pulled, this valve opens, allowing water to flow from the bottle, into the cooler, and finally into your drink.

A bottom-loading water bottle dispenser however makes use of an electric pump to defy gravity and pump water from the bottle into the tank that will create hot as well as cold. The dispenser also has a water line to control the flow, as well as an electronic sensor that determines the time when the reservoir must be filled.

The style that you choose will determine your water bottle is likely to be black or white (or dark) material or stainless steel on the exterior.

How Do You Clean a Bottom-Loading Water Dispenser

Cleaning the bottom-loading water dispenser much like cleaning top-loading machines. It will require the same cleaning solutions along with an empty water bottle as well as a funnel to begin.

  1. Unplug the power source.
  2. Take the water bottle off (aka water guard).
  3. Mix the cleaner inside the container of water.
  4. The reservoir should be drained.
  5. Cleanse the reservoir.
  6. Replace all parts and plug into.
  7. Clean the drip tray for water.

How to Clean a Top-Loading Machine?

Cleaning the top-loading water bottle isn’t a big challenge, however it’s best to leave it till the bottle is full and must be removed in the meantime. Take these measures to wash and clean your water cooler using the cleaning solution you prefer.

  1. Unplug the power source.
  2. Take the water bottle off.
  3. Take off your water shield.
  4. Make sure you clean the dripguard.
  5. Infect the reservoir.
  6. Replace the parts and plug them into.
  7. Clean the drip tray for water.

A dirty water cooler can be a sour appearance. It could become a breeding place for harmful bacteria and harmful germs. A clean water cooler makes sure that water tastes better and healthier. Regular cleaning (every time the bottle gets changed at least every 6 weeks) is a vital part of water cooler maintenance. 

If you follow the above steps you will be able to ensure that no germs that could cause harm are present in your water cooler , and you’ll always have refreshing, cool drinking water at any time.

About Author

Leave a Comment